User's Manual
Installing a CPU Memory Upgrade in the ASN
112944-B Rev. A 1-11
Installing the Tag SIMM
Before you perform this procedure, be sure to attach the antistatic wrist strap, as
described earlier in this chapter.
To install the Tag SIMM:
1. Grasp the SIMM by the top corners and place it into the connector at a
slight angle (F
igure 1-8).
The SIMM is keyed to fit in the connector only one way.
Figure 1-8. Installing the Tag SIMM
2.
Push the SIMM away from you until the locking tabs snap into place.
Notch
ASN0038A