User's Manual

Installing a CPU Memory Upgrade in ASN and SN Platforms
2-8 112944-B Rev. A
Removing the Tag SIMM
You need to replace the Tag SIMM (Figure 2-6) if you are upgrading the SN
DRAM configuration to 32 MB. T
able 2-2, shown earlier, lists the Tag SIMM
requirements for the different DRAM configurations.
To remove the Tag SIMM:
1. Attach the antistatic wrist strap and remove the CPU, as described
earlier in this chapter.
Figure 2-6. Locating the Tag SIMM
2.
Spread the locking tabs on the sides of the SIMM to release it from the
connector (F
igure 2-7).
Tag
SIMM
FX0031A
PCMCIA
Console/ Modem