User's Manual

Installing a CPU Memory Upgrade in ASN and SN Platforms
2-10 112944-B Rev. A
Figure 2-8. Installing the Tag SIMM
2.
Push down on the SIMM until the locking tabs snap into place.
Labeling the Switch Node
After you perform the DRAM SIMM upgrade, label the SN CPU with a new
Memory Size label. Affixing the new label is important because future repairs and
upgrades will require that you correctly identify the current memory configuration
of your SN.
To label your SN:
1. Find the CPU Part Number label on the SN CPU (Figure 2-9).
The CPU Part Number label will read 114252-16 or 114252-32.
2. Apply the Memory Size label to the end of the CPU Part Number label,
making sure that you do not cover any portion of the bar code.
The Memory Size label should be next to the component reference designator
C36 (F
igure 2-9).
FX0033A