User's Manual

11
Part No. 115066-A Rev. B
Figure 8. Aligning the Fast Packet Cache Module (Initial Installation on SN)
Replacing the ASN Component Tray
To replace the ASN component tray:
1.
Gently slide the tray into the chassis.
2.
Using a Phillips screwdriver, tighten the two captive screws that fasten the tray to
the chassis (refer to Figure 1).
3.
Reattach the cables to the proper connectors on the back panel.
4.
Turn on the ASN.
4 standoffs
Mounting holes
FX0025A
Reset
Console/ Diagnostics
Console/ Modem
CPU 060
Connector