User's Manual

4
Part No. 115066-A Rev. B
Removing the Switch Node CPU Module
To remove the SN CPU module:
1.
Turn off the Switch Node.
2.
Disconnect any modem and console cables that are attached to the CPU module.
3.
Remove the flash memory card from the PCMCIA slot by pressing the eject
button to the right of the slot.
4.
Using a flat-tip screwdriver, loosen the captive retaining screws (F
igure 2).
5.
Press the module levers down so that they are parallel to the front of the module.
You will feel the module disconnect from the Switch Node midplane.
6.
Grasp the module by its edges to remove it from the chassis.
7.
Place the module on an antistatic work surface.