User's Manual

6
Part No. 115066-A Rev. B
Removing the Fast Packet Cache Module
To remove the Fast Packet Cache module:
1.
Using needle-nose pliers, pinch the plastic standoffs that hold the Fast Packet
Cache module in place (3 standoffs for the ASN, 4 standoffs for the Switch Node).
Figure 3 shows the location of the Fast Packet Cache module on the ASN.
Figure 3. Locating the Fast Packet Cache Module (ASN)
Figure 4 shows the location of the Fast Packet Cache module on the Switch Node.
ASN0039A
Fast Packet Cache module