User's Manual

Installing a V.34 Console Modem Module in a BayStack ARN Router
1-4 114313 Rev. A
Removing an Installed Module
To remove an existing V.34 Console Modem module from the ARN base module:
1. Locate the installed module and remove the four screws that secure it to
the base module (F
igure 1-4).
Figure 1-4. Removing the Screws
2.
Grasping the edges of the module, pull straight up and lift the module out
of the base module connector socket.
3. Place the removed module in an antistatic bag, or set it on an antistatic
mat.
ARN0046A