User's Manual

Installing an ARE Memory Upgrade Kit

112831-D Rev. A

Shipment Contents

Table 1 lists the components that are part of the 32 MB memory upgrade kit

(Order No. AG1311008) and the 64 MB memory upgrade kit (Order No.

AG1311021). If any parts are damaged or missing, contact the Bay Networks

Technical Solutions Center in your area.

Attaching the Antistatic Wrist Strap

You will find a disposable antistatic wrist strap with each upgrade kit. The

antistatic wrist strap directs the discharge of static electricity from your body to

the chassis of the BN router, thereby avoiding discharge to sensitive electronic

components.

You must wear the antistatic strap whenever you remove, install, and handle the

VBM module or SIMMs.

To attach the antistatic wrist strap:

Remove the strap from the upgrade kit.

Slip the wrist strap loop over your hand and tighten it snugly around

your wrist.

Attach the alligator clip to the frame of the router.

You can now safely perform the upgrade procedure.

Table 1. Shipment Contents

Item Quantity

Virtual buffer memory (VBM) module 1

Single inline memory modules (SIMMs) 2

Phillips screws 4

Antistatic wrist strap 1

Upgrade label 1