User's Manual

Installing an ARE Memory Upgrade Kit

112831-D Rev. A

Grasp the VBM module by the edges and lift it to remove it from the

ARE processor module.

Store the VBM module in an antistatic bag.

Follow the steps in the next section to install the new VBM module.

Installing the Virtual Buffer Memory Module

If you have not already done so, remove the ARE processor module from the

router. Refer to Installing and Maintaining BN Routers for instructions on

replacing a FRE/FRE-2 module.

To install the VBM module:

Align the two connectors on the VBM module with the connectors on the

ARE processor module. At the same time, be sure to align the standoffs

on the underside of the VBM module with the mounting holes on the

ARE module. Then press the VBM module into place.