User's Manual

Installing ARE Memory Upgrade Modules
112831-D Rev. A
7
Removing SIMMs from the ARE Processor Module
To remove the existing SIMMs from the ARE processor module:
1.
Turn the ARE module over so that the component side is facing up.
2.
Using Figure 4 as a reference, locate SIMM sockets U7 and U14 on the
ARE processor module.
Figure 4. Locating the SIMM Sockets
3.
To remove the SIMMs from sockets U7 and U14:
a.
Pull back on the retainers grasping the edges of the SIMM to release
it.
b.
Gently lift up and pull out the SIMM.
U7
U14
A320006A