User's Manual

Installing an ARE Memory Upgrade Kit
8
112831-D Rev. A
Installing the Memory Upgrade SIMMs
The upgrade kit contains two identical SIMMs. To install the SIMMs:
1.
Using Figure 4 as a reference, locate SIMM sockets U7 and U14 on the
ARE processor module.
Sockets U7 and U14 should be empty.
2.
Grasp one of the SIMMs by the edges and turn it so that the key at the
center of the SIMM faces the center of socket U7 (Figure 5)
.
Figure 5. Inserting a SIMM into a Socket
3.
Insert the SIMM into the socket at an angle of approximately 30 degrees
from the vertical.
Key
A320008A