User's Manual

The following Tasks are required for activation
IP-SAT / BCMSVu Server
On DEFINITY ECS R9csi (ProLogix), ECS R9si, ECS R9r
List configuration all or
List configuration Board <CLAN Bd Loc >
Bd # BdType Code Vint Assigned Ports
u=unassigned t=tti p=p sa
1A07 CLAN TN799B 000001 u u u u u u u u
u u u u u u u u
u
change system-parameter maintenance page 2 of 3
SPE OPTIONAL BOARDS
Packet Intf1? Y Packet Intf2? Y
* Bus Bridge : 01A07
* Inter-Board Link Timeslots Pt0 : 6 Pt1 : 1 Pt2 : 1
NOTE: * Only On DEFINITY R9csi (ProLogix).
Refer to Page 6 of 6
Add data-module 40000
Data Extension : 40000
Type : Ethernet
Port : 01A0717
Link : 1
( Node) Name : CLAN
Display Port 1A0717
PORT INFORMATION
Port : 1A0717
Equipment Type : Data Module
Identification : 40000
List configuration all or
List configuration Board <1a07 >
Bd # BdType Code Vint Assigned Ports
u=unassigned t=tti p=p sa
1A07 CLAN TN799B 000001 u u u u u u u u
u u u u u u u u
17
change node-names ip
Name IP Address
default 0 . 0 . 0 . 0
NJ7460JWYSOCKI 135.8.32.??
NJ7460HUGHJOHN 135.8.32.??
bcmsvuserver 192.168.0 .2
CLAN 192.168.0.3
change ip-interfaces
IP INTERFACES
Enable Net
Eth Pt TYPE SLOT CODE Sfx Node Name Subnet Mask Gateway Address Rgn
Y C-LAN 01A07 TN799 B CLAN 255.255.252.0 135.8.12.1 1
display communication-interface links
INTERFACE LINKS
Link Enable Est Ext Type Dest DTE Conn Name
Conn Number DCE Mod
1 Y N 40000 Ethernet CLAN
2
:
25
change ip-services
Service Enabled Local Local Remote Remote
Type Node Port Node Port
SAT y CLAN 5023 NJ7460JWYSOCKI 0
SAT y CLAN 5023 NJ7460HUGHJOHN 0
SAT y CLAN 5024 bcmsvuserver 0
1
2
3
4
5
6
8
9
10
IP-SAT / BCMSVU on DEFINITY
ECS R9r, ECS R9si, ProLogix R9csi
Provided by:
[e-mail]
05/01/2001 18:30 Hrs
Page 2 of 6
Confirm DSA Computer and BCMSVU Server IP Address:
§ Click on Start / Run / CMD
§ At the DOS Prompt type : ipconfig /all | more
§ Note the following items:
§ Computer Name
§ IP-Address
§ For DSA and BCMSVU the IP Address should be static ( NOT DHCP).
7