Quick Start Guide

ManualsBrandsAvaya ManualsConference PhoneAvaya B169 Conference Phone

The Avaya B169 is a battery powered, wireless conference phone that can be connected to the

DECT base station included in the package, to a mobile phone, or to a PC.

Avaya B169 Conference Phone

QUICK START GUIDE

ENGLISH

Issue 1

SD memory card port

It is possible to record a call in progress and use the

Avaya B169 as a dictaphone.

Press the button to start and stop recording.

Recordings can be accessed via the menu.

LEDs

Flashing blue Incoming call

Steady blue light Call in progress

Flashing red Hold, microphone and speaker turned

off

Steady red light Mute, microphone turned off

Signal strength DECT

Date

Time

Battery status

Fully charged

< 1 hr talk time

Display symbols Charging the battery

Charge the battery by

placing the Avaya B169 on

the charging stand or plug

the power cable into the Avaya

B169.

A fully-charged battery provides

up to 60 hours of talk time. The

Avaya B169 lets you know when

there is less than one hour of talk

time left.

Summary of content (4 pages)

PAGE 1
QUICK START GUIDE ENGLISH Avaya B169 Conference Phone The Avaya B169 is a battery powered, wireless conference phone that can be connected to the DECT base station included in the package, to a mobile phone, or to a PC. SD memory card port It is possible to record a call in progress and use the Avaya B169 as a dictaphone. Press the button to start and stop recording. Recordings can be accessed via the menu.
PAGE 2
DESCRIPTION Navigation in menus Display of call list Menu Settings Navigation in menus Display of call list No/end/back Start/stop recording OK Yes/confirm choice Answer/connect calls During a call: Press to call a new person Increase volume Decrease volume End call On/off Mute Hold Alphanumerical buttons Hold down a button for 2 seconds to open the phonebook Conference Automatic dialling of conference groups One press of this button will always connect all parties to a conference call Connectivity
PAGE 3
BESKRIVELSE GETTING STARTED • TILKOBLING BASE STATION REGISTRATION  Put the base station in registration mode.  Select > SETTINGS > DECT > REGISTER.  Select a base (1–4).  Enter the base station’s PIN code.  The default code is 0000 for the Avaya DECT base station. The conference telephone will now search for a base station. The base station has to be in registration mode. If registration was successful, the word SUCCESS will appear in the display.
PAGE 4
CALLS MULTI-PARTY CALLS ANSWERING AND MAKING CALLS  Press to answer an incoming call.  Dial the number and press to make a  Note that different PBXs may require call.  Press an arrow key to open a call list containing previously dialled numbers. Call using .  Press and hold an alphanumeric button for two seconds to call a contact in the phonebook. DURING A CALL  Adjust the speaker volume using the keys  Press  Press and . to turn off the microphone. to put the call on hold.