User's Manual

Avaya B179 SIP Conference Phone Installation and Administration Guide

Valid values: true or false.

<srtp_secure_signaling> Specify whether SRTP requires secure signalling. This option is only used when

use_srtp option above is non-zero.

0: SRTP does not require secure signalling

1: SRTP requires secure transport such as TLS

2: SRTP requires secure end-to-end transport (SIPS)

Same as above for account 2

<url> Place to nd software upgrades. The supported URL types are: HTTP, FTP, and

TFTP.

<dev_mgnt>

<enable> Device management enabled, true or false.

<use_dhcp_option> Use DHCP option for DM server address.

<dhcp_option> Specication of which DHCP option to use.

<le_server_address> DM server address if not provided by DHCP option.

<pagename /> Base name of conguration les to download

<type /> Conguration le type specication

<update_interval> Timing for downloading les. Shall be entered in crontab format:

* * * * * where the * stands for minute (0–59), hour (0–23), day of month (1–30),

month (1–12), day of week (0–7) (Sunday =0 or 7)

Example:

0 6 * * * = the les are downloaded daily at 6:00.

<https_check_srv_cert> Controls server certicate, true or false.

<https_protocol> Possibility to set https protocol if open-ssl auto detection fails.

<www>

<enable_https> Secure communication to the Avaya B179 web server. Default is false.

<pa>

<enable_pa> PA enabled, true or false

<enable_internal_mic> Internal mic enabled when PA set to true.

<enable_internal_spkr> Internal speakers enabled when PA set to true.

<calibration> Calibration value. Note that 0 is auto, 1 is calibration value 1, 2 is calibration

value 1, etc.

<ldap>

<enable> LDAP enabled, true or false.

<name_lter> Name lter according to RFC2254

<server_url> LDAP server address

<search_base> The DN (distinguished name) of the search base

<max_hits>