User's Manual

Avaya B179 SIP Conference Phone Installation and Administration Guide
73
d. Check the SIP Line Service checkbox, enter an appropriate User Agent DN prex, and click Save.
3. Enable SIP Line Service on Telephony Node.
a. On the Element Manager page, go to System > IP Network > Nodes: Servers, Media Cards.
Note the IP address of the node, as it will be used in conguring the B179 later. Select the
Node ID on which SIP Line service is to be enabled.
b. On the Node details page, under Applications, and click SIP Line.
c. On the SIP Line Conguration Details page, select Enable gateway service on this node, and
click Save.