Installation and Maintenance Manual

Avaya B179 SIP Conference Phone Installation and Administration Guide

PROVISIONING – UPGRADE AND CONFIGURATION

<eap_md5>

<eap_tls>

<qos>

<dscp_sip>

<dscp_media>

<time>

<ntp>

<daylight_save>

<ntps>

<sip>

<udp_transport> Specify if UDP shall be used as transport.

<udp_port> Specify the UDP port to listen to.

<tcp_transport> Specify if TCP shall be used as transport.

<tcp_port> Specify the TCP port to listen to.

<tls_transport> Specify if TLS shall be used as transport.

<sips_transport> Specify if SIPS shall be used as transport.

<tls_port> Specify the TLS port to listen to.

<rtp_port> Specify the start port for RTP trafc.

<outbound_proxy /> Specify the URL of outbound proxies to visit for all outgoing requests. The

outbound proxies will be used for all accounts and will be used to build the

route set for outgoing requests. The nal route set for outgoing requests will

consist of the outbound proxies and the proxy congured in the account.

<use_stun> Use Simple Traversal of UDP through NATs (STUN) for NAT traversal.

Default is no.

<stun_domain /> Specify domain name to be resolved with DNS SRV resolution to get the ad-

dress of the STUN servers. Alternatively application may specify stun_host

and stun_relay_host instead.

<stun_host /> Specify STUN server to be used in ”HOST[:PORT]” format. If port is not

specied, default port 3478 will be used.

<use_turn> Use Traversal Using Relay NAT (TURN) for NAT traversal. Default is no.

<turn_host /> Specify TURN relay server to be used.

<turn_tcp> Use TCP connection to TURN server. Default is false.

<turn_user /> TURN username.

<turn_passwd /> TURN password.

<nat_type_in_sdp> Support for adding and parsing NAT type in the SDP to assist troubleshoot-

ing. The valid values are:

0: no information will be added in SDP and parsing is disabled