User's Manual

Parameter Description
PROCSTAT Controls whether local Craft procedures are allowed. The default is 0
which indicates that access to all administrative options is allowed.
REREGISTER The number of minutes the phone waits before and between re-
registration attempts.
REUSETIME The n umber of seconds to wait for successful completion of DHCP
before reusing previous parameters on the default (port) VLAN. The
default is 60.
SNMPADD Allowable source IP addresses for SNMP queries. The default is “ ”
(Null).
SNMPSTRING SNMP community name string. The default is “ ” (Null).
STATIC Controls whether to use a manually-programmed file server or CM IP
address instead of those received through DHCP or a settings file. If a
manually programmed file server IP address is to be used, STATIC
must be set through DHCP.
TLSDIR Specifies the path name prepended to all file names used in HTTPS
GET operations during startup.
TLSPORT Specifies the TCP port number for HTTPS file downloading.
TLSSRVR Specifies the IP addresses or DNS names of Avaya file servers to
download configuration files.
Specifies that Transport Layer Security is used to authenticate the
server.
TLSSRVRID Controls whether the identity of a TLS server is checked against its
certificate.
UNNAMEDSTAT Specifies whether the deskphone will attempt unnamed registration.
VLANTEST Controls the length of time the deskphone tries DHCP with a non-zero
VLAN ID. When the interval is exceeded, the deskphone records the
VLAN ID so that the VLAN ID is not used again, and DHCP continues
on the default VLAN. The default is 60 seconds.
These parameters are saved in the non-volatile memory of the Avaya B189 Conference IP
Phones. If the DHCP server is not available for any reason during phone restart or reboot, the
phone uses these saved parameters.
DHCP Generic Setup
This document describes the generic DCHPv4 administration that works with the B189
Conference IP Phones.
Server Administration
42 Administering Avaya B189 Conference IP Phone December 2013
Comments? [e-mail]