User's Manual

BCM450 System Start Up
12 NN40010-317 Issue 1.2 BCM450 Rls 6.0
2. Type cmd and press OK. This will bring up the MS-DOS / command
prompt.
3. Type ping followed by the default IP Address of the LAN port you are
connected to (OAM = 10.10.11.1, LAN Port = 192.168.2.2). Press
Enter.
4. There are differing responses that may now be displayed.
a. If a Reply is received from the BCM (as displayed below) the IP
connection is working.
b. If any other response is displayed, check the IP settings of your
laptop/PC and the physical connection between the laptop/PC
and BCM.