User's Manual

BCM450 System Start Up
20 NN40010-317 Issue 1.2 BCM450 Rls 6.0
Software Keycodes
Note: If you have already applied the Keycodes via the Startup Profile, you
can proceed to the Initialising CallPilot Manager section.
Keycodes are entered in the Keycodes section of Element Manager, and are
entered as a file containing a range of features
Note: When entering the Keycode file, you may be asked to reboot the BCM.
Certain features such as VoIP G/W Trunks, require the BCM to be rebooted.
Use the following procedure to load a Keycode file.
1. Access Element Manager (refer to Element Manager Connection to
the BCM section of this guide).
2. In Element Manager, click on the Configuration tab, open the System
folder and click on Keycodes.
3. To load a keycode file, click on the Load Keycode File button.
Note: For new un-configured BCM systems, the Status fields will state IDLE
and the Data fields will show a value of 0.