User's Manual

BCM450 System Start Up
24 NN40010-317 Issue 1.2 BCM450 Rls 6.0
4. Enter the IP Settings as required. You can choose to:
 Obtain an IP Address, Subnet Mask, and Default Gateway
automatically (refer to the DHCP Guide for more information
on BCM and DHCP).
 Enter an IP Address, Subnet Mask and Default Gateway
manually.
Note: If there is an existing DHCP server on the network, it is recommended
that you specify a static IP Address for the BCM. See the network
administrator about obtaining a static IP Address. Obtaining an IP Address
automatically should generally only be selected when the BCM is acting as
the DHCP Server for the network. Alternatively, consult the network
administrator about reserving an IP Address for the BCM on their DHCP
server.
5. If you enter an IP Address manually, you will see the following
WARNING box before you can configure the remaining fields. Click
OK.
6. For manual configuration, continue entering the settings in the other
fields, and click OK.