User's Manual

BCM450 System Start Up
NN40010-317 Issue 1.2 BCM450 Rls 6.0 25
7. If Obtaining an IP Address dynamically, tick the Obtain IP address
dynamically box. You will see the following WARNING box.
8. Click OK in the WARNING box, and click OK again in the Modify IP
Settings box.
9. You may lose your connection to Element Manager. You will not need
to reboot the BCM. Click the OK button, and reconnect to the BCM
using the new IP address (unless connected via the OAM port).
10. If the BCM is obtaining its network settings via DHCP (either its own
DHCP server or one that resides on the network), you can choose to
renew the network settings. To do so, click Renew IP Address.