User's Manual

BCM450 System Start Up
26 NN40010-317 Issue 1.2 BCM450 Rls 6.0
11. DNS settings can also be entered, if you are not receiving this
information via DHCP. In the IP Subsystem area, click on the General
Settings tab, and enter the relevant DNS information in the DNS
Settings fields.
Configuring DHCP
The BCM can be used as the main DHCP server for the network, or it can be
used to provide DHCP information to IP Sets only. Alternatively, DHCP can be
disabled on the BCM if DHCP requirements are being provided by another
device on the network.
Note: For full instructions on configuring DHCP, refer to the DHCP Guide.
1. From the Configuration tab, open the Data Services folder, and
select DHCP Server.