User's Manual

BCM450 System Start Up
NN40010-317 Issue 1.2 BCM450 Rls 6.0 39
 MBM1 – DSM32+ (1
st
) = 221 – 252
 IP Sets = 253 – 268
 Applications = 300 – 399
 MBM2 – DSM32+ (2
nd
) = 269 – 299 & 400
 MBM3 – DSM32+ (3
rd
) = 401 – 432
Therefore, the DN numbers associated with the DSM MBM’s are split by both
IP Set DN’s and Application DN’s. It may be more preferable to have
continuous ranges of DSM DN’s, IP Set DN’s and Application DN’s.
Ordering of DN’s into desired ranges can be achieved by use of the
Deconfigure and Configure options within Telephony Resources. Each
resource can be essentially erased by use of the Deconfigure option, and
have a more appropriate trunk or DN number range assigned by using the
Configure option.
Use the following procedure to erase the existing trunk or DN numbering
associated with the resources in Telephony Resources.
Note: Deconfiguring a resource will also erase any programming associated
with the trunks or DN’s already on that resource. Only perform the following
procedure if the trunk or DN numbers require changing.
1. From the Configuration tab, open the Resources folder and click on
Telephony Resources.