User's Manual

BCM450 System Start Up
NN40010-317 Issue 1.2 BCM450 Rls 6.0 41
IP Trunk Configuration
If IP trunks have been purchased (enabled via keycodes) and VoIP
connection to compatible IP Telephony devices via H.323 or SIP trunks is
required, then it will be necessary to ensure the correct number of trunks are
assigned in Telephony Resources.
Note: If VoIP trunks are not being used, skip this section.
Note: For further information on configuring IP Trunks, such as VoIP Gateway
configuration, please refer to the IP Telephony guide.
By default, line numbers 001 – 008 are assigned. Add extra trunks up to the
number of purchased VoIP trunks.
Use the following procedure to ensure that the correct number of IP Trunks
are assigned.
1. From the Configuration tab, open the Resources folder and click on
Telephony Resources.
2. From the Configured Device column, select IP Trunks.