User's Manual

BCM450 System Start Up
NN40010-317 Issue 1.2 BCM450 Rls 6.0 45
Note: For full details concerning IP Phone registration and configuration,
refer to the IP Telephony Guide.
IP Terminal Global Settings
Attribute
Description
Enable registration
Set this value to ON to allow new IP clients to register with
the system.
WARNING: Remember to set Registration to Off when you
have finished registering the new telephones.
Enable global
registration
password
If you want to require the installer to enter a password when
IP telephones are configured and registered to the system,
check this box. If this option is not selected, a user ID
(738662) and password (266344) is requested during IP Set
registration.
Global password
If the Enable Global Registration Password checkbox is
selected, enter the password the installer will enter on the IP
telephone to connect to the system.
Auto-assign DNs
If set to ON, the system assigns an available DN as an IP
terminal requests registration. It does not prompt the installer
to enter a set DN.
Advertisement logo
Any information in this field appears on the display of all IP
telephones. For example, your company name or slogan.
Application DN’s Configuration
Application DN’s are system resources used for CallPilot, MeetMe
Conferencing, Contact Centre and Find Me/Follow Me. You may wish to move
the Application DN numbers out of the range you intend to use for MBM or IP
DN’s. skip this section if you do not need to do this.
Note: If the Application DN’s do require a different number range to the
default, you must first erase the existing numbering as described in the
example process of the General Numbering Considerations section of this
guide.
When the existing numbering has been erased, use the following procedure to
apply the new DN numbering to the Application DN’s.