User's Manual

BCM450 System Start Up
46 NN40010-317 Issue 1.2 BCM450 Rls 6.0
1. From the Configuration tab, open the Resources folder and click on
Telephony Resources.
2. From the Configured Device column, select Applications.
3. Click on the Configure button.
4. Enter the new Start DN in the Start DN field, and the number of
Application DN’s to add in the Number of DN’s to add field (100 is the
number of Application DN’s by default). Click on OK.
5. Reconfiguration of the Application DN’s will require a reboot of the
BCM, which is performed later on in this procedure.