User's Manual

BCM450 System Start Up
NN40010-317 Issue 1.2 BCM450 Rls 6.0 47
6. The new numbering range will be displayed.
Media Bay Module Configuration
When you have obtained the Media Bay Modules and determined their
locations in either the main or expansion units, the Telephony Resources
configuration can be performed.
Note: A keycode is required to enable the expansion unit.
1. Launch Element Manager and connect to your BCM.
2. In the Configuration tab, open the Resources folder and click on
Telephony Resources.
3. The Main MBM 1 location is configured as a DSM32/DSM32+ MBM, as
most installations will use this MBM. If you are installing a pure IP-
Phone system, you may wish to Deconfigure MBM1.