User's Manual

BCM450 System Start Up
50 NN40010-317 Issue 1.2 BCM450 Rls 6.0
9. If the BCM expansion unit is being used in this installation, double-click
in the Configured Device field for Expansion 1 and select MBM-6.
10. Configure each MBM as required, as described in steps 4 – 7 in this
section.
11. When configuring each MBM on the expansion unit, 2 extra fields are
displayed (Note and Dip fields) referring to dip switch configuration.
Whilst it is possible to alter the suggested dip switch configuration, it is
recommended to accept the suggested values. The dip switch settings
on the MBM must match the settings in this field.