User's Manual

BCM450 System Start Up
NN40010-317 Issue 1.2 BCM450 Rls 6.0 65
Station Media Bay Modules
With station media bay modules (MBM) you can connect telephones and
analog telecommunication devices to the BCM system.
Media Bay Module
Utility
DSM16(+)/DSM32(+)
(Digital Station Module)
Connects a maximum of 16 (DSM16(+)) or 32 (DSM32(+))
digital telephones to the BCM system.
ASM4/ASM8
Connects 4/8 analog devices to the BCM system.
GASM8
Connects 4/8 analog devices to the BCM system.
The GASM provides the following additional services: caller ID,
pass through, message waiting indication, and
disconnect supervision at the telephone. The GASM also
allows you to download new firmware.
DSM 16/32(+) Modules
1. There are no module specific settings for DSM modules. However, port
details can be observed. The port details will display information such
as port number, DN’s assigned to ports, the attached device type,
firmware version and current state.
2. For DSM32(+) MBM’s, select either of the 2 sub-MBM’s to view the
associated details.
Set Port Details
Attribute
Value
Module type
Port #
 These are the port numbers of the physical device.
DN
XXXX
The DN number associated with the port.
Device type
Read-only
This is the type of DN.
Version
<read-only>
This field indicates the version of firmware running on the
module.
Call State or State
Idle
Active
Deprovisioned
All modules
This field indicates whether a module line or DN is in use or
even provisioned.