User's Manual

BCM450 System Start Up
86 NN40010-317 Issue 1.2 BCM450 Rls 6.0
7. When the required Norstar Expansion Module type (and line card type
for Norstar TM) has been selected, the Configure button becomes
active. Click on the Configure button to configure extension or line
allocations to the Norstar Expansion Module.
8. The Configure dialog box will appear. You can accept the defaults or
configure new extension (station) or line (trunk) information:
 Norstar Station Module: Accept the defaults or configure the Start
DN, Public received digits/OLI, and Private received digits/OLI.
The received digits and OLI information will be assigned
sequentially to the number of stations available on that module.
There is also the option of assigning Target Lines to the extensions
on the MBM. Tick the Assign target lines check box to do this.
 Norstar Trunk Module: Accept the default Start Line number or
enter a new starting line number for the trunks presented on the
MBM.