User Guide

Error Codes 10-59
Troubleshooting
Chapter 10
8503 This Client is not registered with
that Server.
On the Server application go to
menu item Options|Configure
|Clients and add the Windows
login ID of the user on the Client
PC.
8504 Too many connections to the
Server: The limit is <number>.
This Client cannot be connected
to the Server because there are
already <number> Clients logged
in. You must wait until a Client
logs out of the Server. The
<number> is determined by the
type of hardware key installed.
8505 The Server is performing
maintenance operations.
Typically, database
repairs/compaction are being
carried out. Check the Server to
see what it is doing, and, if
necessary, wait for the operation
to finish.
8506 Unknown rejection code:
<number>
The Server has rejected the
Client connection for an
unknown reason. Contact Lucent
Technologies.
8507 The Server is not properly
configured.
The Server has detected a serious
problem with its own
configuration. Check the Server
configuration through
Options|Configure|Switch
Connection.
8508 The Server could not be
connected.
The Client has attempted to use
the Server without connecting to
it. Contact Lucent Technologies.
ID Description Resolution