Installation Guide

Installing and Removing BCMS Vu Software
4-24 Removing BCMS Vu Client Software
The “BCMS Vu R2 Master Setup” window reappears.
1) To install another software component, select the name of the
component and turn to the appropriate section of this chapter.
2) To leave the installation program, select Exit.
Removing BCMS Vu Client Software 4
.
To remove the BCMS Vu Client software, complete the following steps:
1. Select Control Panel from the Start/Settings Windows menu.
2. Double click on Add/Remove Programs.
The “Add/Remove Programs” window opens.
3. Select the “Install/Uninstall” tab.
4. Highlight BCMS Vu R2 Client on the list of installed software.
5. Select Add/Remove.
The “Are you sure you want to completely remove ’BCMS Vu R2’ Client and
all of its components?” window appears.
Note
You must install the wallboard software on every PC to which a
wallboard is attached, unless that PC has a Server installed on it.
Note
You must re-boot your computer before you can open BCMS Vu
Client. You can do this before or after you install other BCMS Vu
software components (Server or Wallboard).
Warning
To ensure complete removal of the BCMS Vu Client software, make
sure no software programs or applications are running before you
start to remove the Client software.