Installation Guide

Installing and Removing BCMS Vu Software
Chapter 4
Installing BCMS Vu Wallboard Software 4-29
c. If you want to display this information, select Ye s, read the file in the
Notepad window that appears, then exit the Notepad window.
d. If you do not want to display the “readme” file, select No.
5. In the following window, select the same language that you will later select for
the Client, if you intend to install the Client software on this PC. Separate
languages for the Wallboard and Client are not supported.
Note
We strongly recommend that you read the latest information. If
you do not read it during the installation, you should access and
read it later by opening Start/Programs/Avaya/Wallboard
Readme.
Note
At this point, one of two things can occur:
- If BCMS Vu Client is not yet installed, a window appears
asking you to select the language in which you want BCMS
Vu Wallboard to be installed. If this is the case, go to step 5.
-If BCMS Vu Client is already installed, a window appears
telling you that if you want to install BCMS Vu Wallboard in
another language, you must first remove the previously
installed BCMS Vu software. In this case go to step 6.