Installation Guide

Introduction
1-6 Overview of the Installation
Differences Between R2 Version 1 and R2 Version 3 of
BCMS Vu 1
R2 Version 2 BCMS Vu introduces the support of LAN connectivity to the
DEFINITY ECS and ProLogix platform. For more information, refer to the
“serverreadme.txt” file on the CD-ROM.
Overview of the Installation 1
The steps to complete the installation and setup of BCMS Vu Software R2
are:
1. Administer the DEFINITY system.
2. Administer the network (required for the DEFINITY system) or stand-
alone PC, if any.
3. If using a data module, install the data module.
4. Install the hardware key on the Server PC.
5. Install the BCMS Vu Server software.
6. Install the BCMS Vu Client software.
7. Install the BCMS Vu Wallboard software if you are using wallboards.
8. Install the wallboard(s) if you are using any.
9. Configure BCMS Vu software.
10. Verify connectivity to the DEFINITY system.
11. Verify that acceptance criteria have been met.
The remaining chapters of the guide describe these steps.