Installation Guide

Introduction
1-8 What You Need on Your PC
What You Need on Your PC 1
To install BCMS Vu Software R2, you must have at least the following
hardware and software:
For the BCMS Vu Server PC 1
• A single-processor Pentium
• Windows NT Server or Workstation with the appropriate Service Pack
installed on the PC.
• Windows 2000 Professional or Server.
• 64 MB of main memory
• Up to 500 MB (512,000 KB) of disk space
*
• A double-speed CD-ROM drive.
❐ Either of the following:
– If you are using a data module, two external serial ports. One for
data module and one for pcAnywhere.
– A Network Interface Card (NIC), for TCP/IP LAN connectivity to
the DEFINITY system.
*For splits/skills, agents, VDNs and trunk groups measured by BCMS, the
following formula is an approximate guide to the space required in
megabytes for each day’s historical data when the interval measured is an
hour. (When the interval is half-hour, use 185 instead of 370 in the formula.)
# splits/skills + # agents + # trunk groups + #VDNs
(370) * BCMS interval in hours
Note
If you install the software from a remote network drive, the
machine on which the software is installed (either Server,
Client, or Wallboard) does not need a CD-ROM drive.