Installation Guide

Introduction
2-24 Configuring a Network
Windows 98 install this file in the Windows\System\ directory. In Windows
NT 4.0 install this file in the Winnt\system32\ drivers\etc\ directory.
❐ Administer Windows NT 4.0 Users:
All BCMS Vu Client users must also be administered as Windows Users
on the Server (using the Windows NT User Manager utility). These users
must be administered with the same password they use to log into the
Windows Network.
❐ (Novell Network) If your network is a Novell Network and BCMS Vu
Server is operating using domain validation, log all BCMS Vu Clients
into either
l The same domain as that of the NT 4.0 machine
or
l To a domain that has a ”trustee relationship” with that domain, in addition
to logging into the Novell LAN.
❐ Test the network to be sure you have configured the Server correctly.
1. Try to ping the Server and Client from the Server, and to ping the
Server and Client from the Client, by their fully qualified domain
names, for example, machine name.company.com
2. Verify that in Network Neighborhood the Server can locate all Clients
and that all Clients can locate the Server.
If you are successful, the network is configured. You may now install
BCMS Vu software.
Note
You must update this file on every PC on which it is installed
if BCMS Vu Server name information or IP address changes.
Note
The user who runs the BCMS Vu Server must be
administered as a “Power User.”