Installation Guide

4
Introduction 4-1
Installing and
Removing BCMS Vu
Software
4
Introduction 4
This chapter tells you how to install and remove BCMS Vu software.
Topics covered are
• Installing and removing BCMS Vu Server software
• Installing and removing BCMS Vu Client software
• Installing and removing BCMS Vu Wallboard software.
Note
If the hardware key is not attached to the Server PC before you
install the BCMS Vu Server software, the software will be loaded,
but when you try to start BCMS Vu Server, the program will run
only in simulator mode. In this case, you must attach the key, then
restart BCMS Vu Server software.
Therefore, be sure that you have installed the hardware key before
you try to start BCMS Vu Server.
Note
Before you start installing BCMS Vu software, be sure you have
done everything that pertains to your system in Chapter 2,
"Administering the DEFINITY System and Configuring the
Network."