Installation Guide

Installing and Removing BCMS Vu Software
4-14 Installing BCMS Vu Client Software
Installing BCMS Vu Client Software 4
If you are installing BCMS Vu Client on several PCs other than the Server PC, we
recommend that you place the software CD-ROM in one of the Client PCs and
access it from the other PCs on which you want to install the Client software.
To start the BCMS Vu Client software installation setup program, do the following:
1. Close all running programs on this PC.
2. Load the BCMS Vu software distribution CD-ROM into the drive.
The “BCMS Vu R2 Master Setup” window of the installation wizard appears.
3. Select “BCMS Vu Client Setup.”
The “Welcome” window appears.
Note
If you chose to install BCMS Vu Client after you installed BCMS Vu
Server or Wallboard, and you did not re-boot your PC, but instead,
selected “BCMS Vu Client Setup” in the “BCMS Vu R2 Master Setup”
window, go to “Welcome” on page 4-15.