Installation Guide

Installing and Removing BCMS Vu Software
Chapter 4
Installing BCMS Vu Client Software 4-19
a. Since BCMS Vu does not support different languages for the Server,
Client, and Wallboard software, if you decide to install client in a
different language from the software that is already installed, you must
exit the install procedure (select Cancel, then Exit), remove the Server
and/or Wallboard software (see “Removing BCMS Vu Server
Software” on page 4-12, or “Removing BCMS Vu Wallboard
Software” on page 4-36) and reinstall all software components in the
same language.
b. If you decide to install BCMS Vu Client in the same language that
BCMS Vu Server or Wallboard is now installed, select Next.
The “Choose Destination Location” window appears.
Choose Destination Location 4
The “Choose Destination Location” window is where you select the directory on
your PC in which the BCMS Vu Client software will be installed. You may install
the Client software on any network drive or on any directory on your PC.
Note
We strongly recommend that you accept the suggested default
location and install the software on the local drive where the Client
will be running. This will enhance performance.