User's Manual

Installation
8 Issue 1 November 1998
Figure 1. Mounting on a Wall
.280” diameter
Install one each on each end:
.187” diameter
5/16” x 0.50” screw
5/16” split lockwasher
5/16” hex nut
To adjust the viewing
angle, insert a cotter
pin into different holes
on each end
Rubber
Bumper
#8-32 x .375” screws
#8-32 lockwashers
WB2/IW2 46”
WB3/IW3 58”
WB1/IW1 34”