Digital AM / FM Tuner Installation and Use Manual Issue 1, October 1999 © 1999 Bogen Communications, Inc. All rights reserved.
© 1999 Bogen Communications, Inc. All Rights Reserved. Printed in Korea. Notice Every effort was made to ensure that the information in this guide was complete and accurate at the time of printing. However, information is subject to change.
Digital AM / FM Tuner Package Contents Your carton contains: * Digital AM/FM Tuner unit * FM Antenna * AM Loop Antenna * Stereo-to-mono Cable * Mono-to-mono male RCA Cable Description This Lucent Technologies AM/FM Tuner incorporates the latest in PLL digital circuitry for reliable performance for years to come. Antenna Connection This unit is designed for connection to various antenna systems as described below. CAUTION: For external antennas, use No.
Audio Connection Two audio patch cords are provided to make audio connections. One cord is a mono patch cord (one RCA plug at each end) and the other is a stereo-to-mono cord (2 RCA plugs at one end, 1 RCA connector at the other end). 1. Connect the stereo end (two RCA plugs) of the stereo-to-mono cord to the R and L OUTPUT terminals on the unit (see connector panel diagram on page 3). 2. Connect the other end (one RCA connector) of the stereo-to-mono cable to one end of the mono-to-mono cable.
