Configuration manual

64 QoS configuration
NN47928-501NN47928-501
Repeat steps 3 and 4 for each queue that you need to configure.
5 Exit all levels of configuration mode:
end
End
Variable definitions
The following table describes the variables and values for configuring QoS queue settings.
Variable Value
interface-type
Type of the ingress L3 interface. The physical or virtual interface type.
interface-id
The specific interface of the interface type.
queue-number
Specifies the value for the queue number.
min-green-threshold
Type the minimum Green Threshold value.
Green packets start to drop at the configured minimum depth.
The default value is 100.
max-green-threshold
Type the maximum Green Threshold value.
All green packets are dropped at the configured maximum depth.
The default value is 200.
min-amber-threshold
Type the minimum Amber Threshold value.
Amber packets start to drop at the configured minimum depth.
The default value is 50.
max-amber-threshold
Type the maximum Amber Threshold value.
All amber packets are dropped at the configured maximum depth.
The default value is 75.
queue-weight
Type the queue weight.
The default weights are:
• queue 0 - 0 (cannot be changed)
• queue 1 - 0 (cannot be changed)
• queue 2 - 0 (cannot be changed)
• queue 3 - 512 (cannot be set to 0)
• queue 4 - 256 (cannot be set to 0)
• queue 5 - 128 (cannot be set to 0)
• queue 6 - 64 (cannot be set to 0)
• queue 7 - 32 (cannot be set to 0)
Configure the weight to zero to make the queue to be a part of strict
priority scheduler.