Configuration Guide

172 VPN advanced configuration
NN47928-500NN47928-500
Variable definitions
The following table describes the variables and values for configuring the user database.
IP address pool configuration parameters
The following section describes the parameters for the configuration of the IP address pool located
at
Configuration, VPN, Users, Address Pool tab.
Prerequisites
• The address pool cannot be in the same subnet as DHCP addresses.
Variable definitions
The following table describes the variables and values for configuring the VPN address pool.
VPN client termination configuration parameters
The following section describes the parameters for the configuration of client termination located
at
Configuration, VPN, Users, Client Termination tab.
Variable definitions
The following table describes the variables and values for configuring client termination.
Variable Value
User Name Type the user name.
The range is 1 to 31 characters.
Password Type the password for the user.
The range is 1 to 31 characters.
Variable Value
Pool Name Type the name of the address pool. Addresses within the pool are
allocated to remote users when they make VPN connection requests.
Start IP Address Type the first IP address of the pool.
End IP Address Type the last IP address of the pool.
Variable Value
Policy Action Select this check box to create a policy action.
Policy Name Type a IPsec policy name.
Each policy must have a unique name.
The range is 1 to 63 characters.
Policy name ALL is not allowed.