Configuration manual

16 WAN configuration
NN47928-501NN47928-501
DSL
DSL appears under WAN configuration if you are connected to a BSG12aw.
Prerequisites for DSL configuration
• You must have access read/write permission to configure DSL.
DSL configuration procedures
The following task flow shows the sequence of procedures to perform to configure DSL.
Figure 3 DSL configuration procedures
Configuring DSL
Complete this procedure to configure DSL.
Procedure steps
Step Action
1 Enter global configuration mode:
configure terminal
2 Enter interface configuration mode on the WAN interface:
interface pvc 1/1
3 Configure the Virtual Path Identifier: