Configuration manual

32 Wireless network configuration
NN47928-501NN47928-501
Procedure steps
Step Action
1 Enter global configuration mode:
configure terminal
2 Create a wireless LAN:
config wlan create <wlan-id> <SSID>
3 Tie the WLAN to the VLAN:
config wlan interface <wlan-id> <vlan-name>
4 Set the WLAN authorization type
config wlan security auth-type <auth-type> <wlan-id>
5 Configure the authorization key:
config wlan security pre-shared-key <wlan-id> <key-format>
<key>
6 Enable the WLAN:
config wlan enable <wlan-id>
7 Set the country code. The radio must be disabled before you set the country
code:
config ap country us
8 Enter radio interface configuration mode:
interface radio 1/1
9 Set the radio mode:
config dot11 mode <radio-mode>
10 Turn on the radio. You must set the country code before you enable the radio:
config dot11 enable network
11 Exit all configuration modes:
end
End
Warning: Setting the incorrect region can result in the violation of applicable
law.