Configuration manual

35
Configuration — Command Line Interface
SIP configuration
This section describes the procedures to configure SIP for the Business Services Gateway (BSG)
system.
Prerequisites to SIP configuration
• You must have VOICE - READ WRITE permission.
• The Internal SIP Server must be enabled. For details, refer to the BSG8ew 1.0
Configuration (NN47928-500) guide.
SIP configuration procedures
The following task flow shows the sequence of procedures to perform to configure SIP.
Note: You should configure the emergency number (for example, 911) before
you use the SIP server. This ensures that an emergency call originating on your
system reaches its destination if the SIP server becomes unavailable. To configure
the emergency number, see Configuring FXO (page 41).