Configuration manual

42 SIP configuration
NN47928-501NN47928-501
Procedure steps
Step Action
1 Enter global configuration mode:
configure terminal
2 Enter VOIP configuration mode:
voip1000
3 Disable VOIP:
shutdown
4 Exit VOIP configuration mode:
exit
The system is now in global configuration mode.
5 Enter interface configuration mode on FXO channel 1:
interface fxo channel 1
6 Enable FXO line 1:
set pstn-gateway enable
7 Set phone number for FXO line 1:
set fxo channel-number <fxo-phone-number>
8 Set the password for FXO line 1:
set fxo password <fxo-password>
9 Set the forwarding number:
set fxo forward phone-no <fxo-forward-phone-number>
10 Set the maximum number of rings allowed:
set fxo ring count <max-number-rings>
11 Set the emergency number:
set fxo emergency-number <emergency-phone-number>
12 Set the on-hook detection time:
set fxo hook detect time <detect-time> milliseconds
13 Exit from interface configuration mode:
exit
14 Enter VOIP configuration mode:
voip1000
15 Enable VOIP:
no shutdown
16 Exit from all configuration modes:
end