Configuration manual

SIP configuration 43
Configuration — Command Line Interface
End
Variable definitions
The following table describes the variables and values for configuring FXO information.
Variable Value
fxo-phone-number
The phone number assigned to the line.
fxo-password
The password to access the FXO line.
fxo-forward-phone-nu
mber
Number to use when an incoming call on the FXO channel
requires forwarding.
max-number-rings
The ring count. This is the maximum number of rings within
which FXO must get an answer from the remote number.
The minimum value is 1 and maximum value is 6.
The default value is 2.
emergency-phone-numb
er
The emergency phone number to route emergency calls to.
detect-time
Type the on-hook detection time.
The value ranges from 100 to10000 milliseconds.
The default value is 2000 milliseconds.