User Guide

BSGX4e Business Gateway User Guide 381
Release 01.01 NN47928-102
Web User Interface
Access Requirements
A Web UI log on has these requirements:
 A workstation set up to access the Internet. Its Web browser must be either
Microsoft Internet Explorer or Mozilla FireFox
 The IP address of the BSGX4e device. From the LAN, use the eth1 address
(default, 192.168.1.1); from the WAN, use the eth0 address.
 The name and password of a user account configured in the BSGX4e unit. Two
user accounts are predefined: nnadmin with default password PlsChgMe! and
user with default password netcat. See “User Management” (page 57).
Log on Procedure
1.Enter the IP address from the Web browser:
For example, assuming that the eth1 IP address has not be changed from its
default, enter the following to log on from a workstation on the LAN:
 through HTTP
http://192.168.1.1
 through HTTPS
https://192.168.1.1
2.The log on window appears, requesting a user name and password. See Figure
19.
Figure 19. log on Window
3.Enter a user name and password in the text boxes.
The initial password for the predefined user account nnadmin is PlsChgMe!.
Note: Names and passwords are case-sensitive.
4.Click Login.
The Web UI opens its System Screen, which shows current system statistics. See
Figure 18.