User's Manual

192 Chapter 6 Policy-enabled networks and QoS
212160-B
default cops retry command
The default cops retry command restores the default COPS TCP retry
settings. The syntax for the
default cops retry command is:
default cops retry
The default cops retry command is in the config command mode.
The
default cops retry command has no variables or parameters.
default cops server command
The default cops server command restores COPS TCP port and priority
settings for a COPS server configuration. The syntax for the
default cops
server
command is:
default cops server <A.B.C.D> [tcp-port] [priority]
The default cops server command is in the config command mode.
Table 108 describes the parameters and variables for the
default cops server
command.
Table 107 cops server command parameters and variables
Parameters and
variables
Description
<A.B.C.D> Enter the IP address of the COPS server you want to use.
tcp-port
<0-65535>
Enter the number of the TCP port you want to use.
The default port is 3288.
priority <0-65535> Enter the priority you want this server to have.
The default priority is 0.